Bunny Hops & Flying POV

I received a call from my daughter earlier today. She's currently a counselor at Camp Quaker Haven and it was the first time I'd heard her voice since she left last week.  She's also our 'corporate cinematographer', and has produced almost all of the videos that Belite has posted on Youtube.

"Hey Dad," she said. "Did you know that I posted another Belite video before I left Wichita?"

No, I didn't know that.

It's great having a cinematographer in the family!  More video to show people what we are doing.

I had taken quite a bit of video, shot from my Point Of View, while flying the Superlite several weeks ago. It does a great job of showing the world flying by while piloting an agile single seat airplane. You can see it here:

Also, we shot some video of our Trike a few weeks ago.  It's just a series of bunny hops, mostly up and down the runway, but it shows the gentle landing characteristics of the Trike. 

(A little off topic:  I flew both of these planes earlier today, in Kansas strong winds.  They handled the wind with no difficulty).

Anyway, here's the video of the Trike doing bunny hops.

The Trike has free castering nosewheel steering.  You turn the airplane by applying either left or right heel brake.  I'm reminded of when I first flew a Grumman Cheetah back in 1978 or 1979:  ground handling works basically the same.

A picture of a wing for the upcoming Belite Aircraft

Here's a sneek peak of the new wing design for the Belite aircraft. Notice: carbon fiber spar tubes, carbon fiber ribs, carbon fiber false ribs. Also note plywood veneer (0.4mm) which is bonded on top of carbon fiber rib cap strips for purposes of bonding to ceconite covering. Some of the glue joints have been made (EG: rib to spar) while others haven't yet been made. (EG: front false ribs). The entire weight of everything you see here is less than 14 pounds. (Not counting sand bag and level. :-)

Also note the really cool wing work benches we made. The stripes are exactly 6 inches apart, and the entire work surface has been leveled.

The end ribs have a solid sheet of carbon fiber bonded to them, for appearance. They are beautiful and they are completely visible, even after the ceconite covering has been finished.

I will have a completed aircraft, along with a completed airframe/wing without covering on display at Airventure. Come take a look!!