Please note: James' blog has moved to a Wordpress site. To access it, please visit
http://jameswiebe.wordpress.com/. All posts have been transferred to the new site, and all new posts will only be accessible via Wordpress. Thank you for your interest!
We are in the middle of a blizzard here in Wichita, KS. So we all left work early, and I brought home a prototype wheel assembly for our ultralight amphibious float. It needs a slight bit of tuneup, but I figured you'd like to see the engineering work in process.
 |
| Main retractable landing gear for ultralight amphibious float. |
 |
| Front view of retractable gear assembly. |
 |
| View of reverse side of retractable landing gear. |
The wheel used is a 5"; the brake assembly is an Avid BB5. Assembly is not complete. Weight of the entire subassembly will be about 7.5 pounds per assembly.
2 comments:
Will the amphib floats accomodate a 2-seater airplane?
This is why I ordered the carbon fiber spar option with my Belite kit. I live in a floating home on the river near the airport I'm hangared at. Conditions to hangar a plane are getting more and more difficult (expensive and difficult for anyone new to flying). At this point in my flight training, I need to get hours in taildragger w/flaps to become proficient. With the belite, I'm covering all the bases.
Post a Comment