Tuesday, January 1, 2013

Belite Aluminum Ultralight Aircraft Cabin Construction, #5

Please note: James' blog has moved to a Wordpress site. To access it, please visit http://jameswiebe.wordpress.com/. All posts have been transferred to the new site, and all new posts will only be accessible via Wordpress. Thank you for your interest!



This post is #5 in a series of articles on how to assemble a Belite Ultralight Aircraft cabin using aluminum.

Post #4 in this series is HERE.
Post #3 in this series is HERE.
Post #2 in this series is HERE.
Post #1 in this series is HERE.

Let's jump right in...  It's looking more and more like a real airplane cabin all the time.

After deburring the top rear skin, clamp it in place:

Clamp the top rear skin in place.

Another view of clamped top rear skin.
Then proceed to clecos and riveting the skin in place.

Rear skin attached with rivets.

Rear skin fully attached with rivets.
If you haven't already, install remainder of rivets along each top side of cabin.  Please note and install extra rivets as shown in photo below.

Side rivets with extra rivets.
Now it's time to add the top side door skins.  Note how they UNDERLAP the star joint on each side.  Also note the windshield attachment piece in the following photo, it will be used a little later in the process.

Side skin and windshield attach piece.

Lucky poses.

Front of side skin, with star joint underlapping clearly visible.

Alignment of side skin, viewed from front.

Rear view.  If all is done perfectly, the rear  corner has a nice sharp corner.

Another view of side skin.

Star joint area.

Yet another view.
It's finally time to fully rivet the star joint.

Finally time to fully rivet the Star Joint!

Done for this afternoon...  more soon.

Monday, December 31, 2012

Teal Beauty Develops on New Years Eve

Please note: James' blog has moved to a Wordpress site. To access it, please visit http://jameswiebe.wordpress.com/. All posts have been transferred to the new site, and all new posts will only be accessible via Wordpress. Thank you for your interest!


Teal Beauty with big wheels.

New Year's Eve.

Hey, we worked today.

The boys and I went home early at 2:00...

Beauty emerges in a Teal color.

By the way, I'm not given away the big tires.  But they sure look sweet on Teal Beauty.



Aluminum Ultralight Aircraft from Belite, under construction

Tail of aluminum ultralight aircraft

Cabin of ultralight aircraft from Belite

Fuel deck on ultralight aircraft from Belite

Firewall goes here

And here is the view from the rear on an ultralight airplane from Belite

Quartering rear view, including tundra tires from Belite Aircraft
Everything you see weighed 86 pounds.  This plane easily makes FAR part 103 ultralight weight, even with the tundra tires.  But we'lll ship it with smaller tires....




Saturday, December 29, 2012

Carbon fiber stabilator; amphibious Belite?

Please note: James' blog has moved to a Wordpress site. To access it, please visit http://jameswiebe.wordpress.com/. All posts have been transferred to the new site, and all new posts will only be accessible via Wordpress. Thank you for your interest!


We've been working on our carbon fiber processes... and in anticipation of some absolutely crazy stuff in 2013 (EG, an amphibious version of a Belite, for which we already have a firm order with deposit), some additional weight savings are necessarily on the development plate to accommodate the big amphibious floats in a legal Part 103 Belite ultralight aircraft.

So here's a sneek photo of Belite R&D:  a carbon fiber stabilator (combination elevator / horizontal stabilizer).

Carbon Fiber Stabilator, Lucky and Chance check it out
The important technical factors are:

Span:  about 100 inches (2.54 meters)
Chord:  30 inches
Effective area:  19.16 square feet (about 1.78 square meters)
Construction:  Carbon Fiber
Weight, as pictured:  about 4 pounds
Target weight, completed assembly with covering:  about 5.5 pounds (2.5 KG)
Airfoil:  NACA 0012, symmetrical
Target load capability:  approximately 240 pounds lift, representing full control deflection at yellow line speed (62mph)
(all information subject to change)

Benefits:

* Reduced drag - elimination of stabilizer support wires; lower coefficient of drag in cruise
* Reduced weight -- should save around 6 pounds (2.7KG)
* Better authority on takeoff roll (get the tail up faster) and better authority on landing (better flare at lower speeds, allowing safer landings and lower speeds)

Downsides:

* Expense of carbon fiber
* Engineering time
* Risk in testing

All the parts in the photo were designed on our CAD software and 'printed' on one of our CNC machines, the ShopBot.  We also manufactured our own carbon fiber panels, which were cut on the ShopBot in the various shapes.  We purchase the carbon fiber spars from a vendor.

The carbon fiber panels technical specs are as follows:

3K woven fiber, one layer each side
1/8" wood core
West Systems epoxy
Vaccuum bagged on glass

The final thought to chew on:  each carbon fiber rib weighs about 2.1 ounces...  that's 60 grams.





Friday, December 28, 2012

Belite Aluminum Ultralight Aircraft Cabin Construction, #4

Please note: James' blog has moved to a Wordpress site. To access it, please visit http://jameswiebe.wordpress.com/. All posts have been transferred to the new site, and all new posts will only be accessible via Wordpress. Thank you for your interest!


I hope you had an awesome Christmas!

Shortly before Christmas, I had an amazing two hour flight in the Burgundy UltraCub.  I flew out into the flint hills again, and made a video of most of the flight.  I took lots of photos of sights along the way, including wind turbines near Beaumont, KS, and a friend's house out in the flint hills as well.  I'll be posting an edited copy of that video soon; along with some of those photos.

When I returned to home base after that flight, the plane still had over a gallon of gas in the tank, and I've now accumulated 7.9 hours in the Burgundy UltraCub to date.  I thoroughly enjoy the look and sound of the 1/2VW engine.

We will install a brand new cabin in the Burgundy UltraCub over the next 8 weeks, so that when it goes to Florida for Sun N Fun, it will be absolutely up to date with our current design.  (The original cabin was hand built without the benefit of CNC placement of drill holes; lots of stuff didn't line up well; and some of the features in the final cabin design were missing; PLUS it had extra tubing and weight where some dimensions were screwed up...)  So stay tuned on that...

***

Today I am posting Episode 4 of the ongoing saga of how to build a Belite cabin.   The actual construction of this ultralight aircraft cabin goes very rapidly, and everything lines up, and it's just thrilling to build a structure which is so very light and very strong and very aesthetic all at the same time... and that is a lot of ANDS.

For links to earlier Episodes, just search "construction" in the search window of this blog.  The search window is on the right side of the blog.

Some of the following construction jumps around a bit.  I have two reasons for this:

a)  It beats the boredom of just working on one area of the cabin.
b)  It gave me something to do while waiting on our ShopBot to cut more CNC parts.  You won't have this problem, as you'll have all the parts in front of you.

Let's cut two thin wall 1", 34 1/4" tubes.

You'll need two thin wall 34 1/4 inch square aluminum tubes.
And also a 23 7/8 inch tube of the same material:

And a 23 7/8 inch tube
The 23 7/8" tube clamps in place along the top of the rear gusset.  The longer tubes rest on each side side skin.  One side and the rear is visible in the following photo:

Rear tube and side tube

Rear tube clecos

Front Diagonal Supports

Front Diagonal Support clamped in place
Front Diagonal Support with rivet and clecos
Front Diagonal Support fully riveted
In a similar manner, cut and fit two Rear Diagonal Support, then clamp and cleco in place.

Rear Diagonal Supports.
Rear Diagonal Supports, riveted in place.
Now let's move to the front of the cabin and finish out most of the rivets in the Front Cross Box.
Front Cross Box rivets, looking from front of plane backwards.
Front Cross Box rivets, from other side.

Now, fit the Front Cabin Cross Tube Gussets.  Yours are probably pre-notched, but I had to notch mine.

Gussets for Front Cabin Cross Tube.  
Although the above photo only shows one gusset, the gusset is actually doubled (one on top of the other).  It's time to pull some rivets:

Gussets with rivets and clecos
Now our focus shifts to installing four Side T Gussets, two on each side of the airplane.
Side T Gussets clamped and clecoed.
Side T Gusset riveted in place.
Please make sure you've placed clecos in the rear tube, as shown below:

Clecos on rear tube
Gussets need to be added on each Rear Diagonal Support.  A bend is placed in each gusset prior to placement.
Rear Gusset for Rear Diagonal Supports.

Another view of gusset for Rear Diagonal Support, clearly showing bend
Rivets on the gusset
Ensure that rivets have been placed on the bottom of the rear fuselage.
Rivets on bottom of rear fuselage.