Saturday, September 5, 2009

Photos of our first production aircraft

I just posted photos of our first production FAR part 103 aircraft on flickr.

You can find them here:

http://www.flickr.com/photos/beliteaircraft/

Have a look and tell me what you think!

The cowling is not yet installed on this airplane.

Thanks!

James

Sunday, August 30, 2009

Sport Pilot Cover Story on Belite Aircraft; New Pricing

I am, in my heart, an entrepreneur. I like to take risks, innovate, market my ideas and see what happens.

At Airventure, I was privileged to introduce a new aircraft: the Belite 254 CF, which is a FAR part 103 legal airplane. This aircraft features a lot of carbon fiber, in a very delightful, small package.

This airplane caught the attention of a lot of people.

We had chosen to display it in the North exhibit area, far away from the rest of the ultralights. We chose to do this because we felt we had a fundamentally different idea about how an ultralight should be designed and marketed. We thought our potential customers might not be ‘ultralight’ enthusiasts. We were looking for people who appreciated innovative engineering, sprightly design, good looks, and a measure of taildragger conventionality, all while flying and owning an airplane that does not require an FAA registration, nor a pilot’s license, nor a medical. (Bad or declined medicals are welcome as well, thanks to the graces of Federal Aviation Regulations FAR part 103.)

Our friends at the Experimental Aircraft Association have chosen to publish an article about the Belite as their cover story this month (September cover) in Sport Pilot magazine. We are truly honored.

We have decided to streamline our product offering a bit. We created a new low cost version of our airplane, which we call the Belite 254. It looks exactly like its big brother, the Belite 254 CF, with the exception that the rear fuselage is not fabric covered. Have a look:

We were able to cut the price by using more aluminum and less carbon fiber, and by cutting out all of the options which add expense but provide no benefits to the patch flyer. As a result, it is available ready to fly for $25,000 less than the Carbon Fiber version!

Here's another pic (the windshield hasn't been installed yet, but will be later this week.)

We will be introducing a cost reduced *kit* as well, which will be available for substantially less. This is possible because we are paying careful attention to the options which people want, and we are also able to cut out some labor expense by tack welding the steel. Many of our potential customers want to do their own welding; we're happy to oblige. This revised kit pricing will be announced in September, and it will be big, welcome news for budget minded homebuilders! Stay tuned. (Send an email to us: info AT beliteaircraft.com, if you are interested in our kit pricing when it’s released.)

Here’s our new price list:

1) Belite 254, Ready To Fly, for $29,995. This plane incorporates a lot of goodies: Carbon fiber firewall; 28HP engine; full span flaperons; aircraft grade steel fuselage and cabin; 5 gallon detachable fuel tank; (for easy refueling); 5 inch wheels; brakes; electric start, full lexan windshield, fiberglass cowling, flight instrumentation, much more! Also includes a sharp looking paint job! We believe that this is the finest value in very light aircraft in the world. It looks like an airplane, it flies like an airplane, it’s economical, and the wings fold for easy storage and transport. It crushes FAR Part 103 weight requirements with a flying weight of about 235 pounds!!

2) Belite 254 CF; Ready To Fly, for $54,995. This version adds approximately 50 features, including carbon fiber spars and ribs; hydraulic brakes; wood instrument panel with lots of good stuff in it; ballistic parachute; the list goes on and on. You name it, the Belite 254 CF has got it as a feature.

3) Belite 254 KIT, price to be announced in September! Stay tuned.

Now the fine print bad news: Our delivery position availability is limited. A deposit of $2,500 holds a delivery position. First come, first serve. We reserve the right to raise prices at any time. Etc., Etc.

Specific details of each configuration are in the website, www.beliteaircraft.com

If you want to see it fly, look at http://www.youtube.com/user/BeliteAircraft#play/uploads/0/byy6qR8TB5w to see our demo video.

If you are looking for the very finest Part 103 legal aircraft, you have arrived. Enjoy!

Fly Safe and Have Fun,

James Wiebe, CEO

Belite Aircraft

P.S. We are looking for qualified dealers and international distributors for our aircraft. If interested, please understand that we require dealers to order a demo unit (to show) and one more aircraft. We have a similar program for international distributors. In return, we offer a generous discount and a territory.

Sunday, August 9, 2009

Breaking a Carbon Fiber Wing!

EDITOR'S NOTE, added NOVEMBER 4, 2010:

1)  The stated load of about 1100 pounds, is loaded onto one wing in this test.  Multiply by 2 for the total load that the wing structure would 'see'.  It has come to my attention that this lack of clarity has confused some people.  Sorry!  1134*2 = 2268.  2268 / 4 = 567 pounds.

2)  We are now using an improved carbon fiber spar --  more carbon fiber than the one tested below.  We now have our spars made for us by Forte Carbon.

Original Post:

We received requests before and during Airventure to show actual G testing of our Carbon Fiber wing. I'd promised one person to post some photos shortly after Airventure. While I had performed testing on individual spars, I'd yet to test a wing as a completed assembly. So yes, I was working in the theoretical, and it was time to 'show me', as our friends in Missouri would say.

The timeline to do all of this was significantly accelerated by the fact that both wings took damage in transit to Oshkosh on the truck. To add insult to injury, we managed to pierce the fabric of one wing with a prop blade on the way home, and then bent the rear trailing edge beyond the point of easy repair. In other words, the wings were now ideal candidates for further destructive load testing, rather than repair and reuse.

As background, carbon fiber does not behave like any metal. Whereas metal, when highly stressed, will begin to deform yet still provide strength, carbon fiber will take loads nearly to 100% of strength without permanent deformation. Therefore, the testing of a carbon fiber structure provides a different set of insights into the construction and engineering of the wing than does an aluminum spar. Unfortunately, the test regulations cloud the issue a little, but then again, we're part 103, so those regulations don't apply to us.

Carbon Fiber has the nasty habit of shattering when it hits the load limit. We do our testing with an air of caution. We don't want to be under the wing when it breaks, nor do we want to catch splinters from the destructive force of all that tension as the wing shatters into piles of useless jaggies.

We wanted to demonstrate that our carbon fiber wing statically exceeded our stated spec of 3.8/1.5 Gs. I had mentioned to some that I thought the wing would sail past the requirements without difficulty. FWIW, if you're paying a premium for Carbon Fiber, it's nice to know that it's both lighter and stronger.

I was a little intimidated by the idea of flipping the airplane upside down to measure. So we started with the easy test: a negative G test.

This simply involves piling loads of weights on the top of the wing. The most significant thing this demonstrates is that the lift and jury strut assembly is up to the task of holding the weight.

So, without further ado, here's a pic of our Belite 254 holding 2G worth of weight off the ground. This is a negative G test.


You can see that we removed the wheels from the plane prior to the test.

I had a good look at the Carbon Fiber lift struts in our part 103 airplane. While it's hard to say in this kind of test, they didn't appear to be too stressed. (If they fail in this compressive load, it's fair to say that the disintegration would by quick and dramatic, as the entire load on the wing would tumble to floor.)

Now, on to the test that really concerned me -- the positive G load test.

We attached our wings to another fuselage, which was flipped over and held off the floor on the bolt attach points using concrete blocks.

We proceeded to lay foam over the wing, and then we started to pile the weight on.

When we hit close to 3Gs of weight, one of my employees began to have that stunned look on his face, as if we were demonstrating an impossibility. I knew that aerobatic airplanes went to +9 or even higher demonstrated G loads in their wings, and I mentioned that to him. He still looked stunned.

Now the first piece of bad news.

As we came close to 3Gs of positive load, the wing made a few popping sounds, but did not collapse. My employees thought I'd call off the test, but that's just not the way I do things. We
continued to load weight on, and the wing continued to make popping sounds. Then I realized what was happening: the individual ribs were failing under compressive loads coming through the fabric, but the spars were holding fine. We pulled the weights off, and the bottom of the wing showed crush damage into the wing. I cut the fabric open, and sure enough: the ribs had failed.

Well, I'd rather have it happen now than after delivery to a customer.

Several ribs showed crush damage, with the failure mode essentially being delamination of ribs under compressive load. (The load vector was from the bottom of the rib, through to the top of the rib.) Instantly the gears turned in my head: I needed to add some strength from the top to the bottom, which would always be in compression, never in tension. That characteristic immediately made me think of the use of plywood stiffeners, not carbon fiber.

A few days later, another wing panel was ready to test, with a slightly revised rib design. (The addition of the rib stiffeners added about 10 ounces of weight to each wing, while increasing the crush characteristics of the rib probably by a factor of 3x+...)

Weight remains critical to everything we do. This new set of carbon fiber wing panels were coming in very light in weight (we're getting better and more uniform), so we really didn't change our net weight on the wing. A quick run on the scales, and the numbers were confirmed: the weight of the wing panel was well under 14 pounds, even with the improved, heavier rib. Less than 14 Pounds!

Caveat: This wing panel wasn't yet covered (and covering adds strength) but I was eager to give the positive G loading another test. So the sawhorses were set up to catch the weight at the fuselage strut attach points, and at the spar attach points, exactly like attachment to the airplane fuselage and struts. The lift vectors would resolve differently (in flight, the main spar would be in compression, and this vector was not in our test; likewise, we didn't use lift struts, and they would be in tension through the strut attach points).

A few minutes later, the wing panel had a load of a little over 1100 pounds on it. 4Gs! So Cool!

I grabbed the camera and started to position myself to take a few shots.

And then it happened: a loud pop, and the wing visibly settled downward. I knew immediately that one of the spars had snapped in two.

EXCEPT I WAS WRONG!

One of the sawhorses had failed, causing the popping sound. The wing was fine, unbroken.

The wing was now suspended on the other good sawhorses, and on the remainder of the broken sawhorse, and on a 'safety' post which had been under the end of the wing just for such a situation.

In other words, the failure of the sawhorse caused the load to instantaneously shift from the design configuration, to some other configuration, and nothing in the wing was broken, even as the 4G load shifted around the wing. It was sort of like a lift strut failed in flight.

Very. Impressive.

I could see that an additional further failure of the broken sawhorse would be a catastrophic problem. I quickly unloaded 1100 pounds of sand from the wing without even taking a photo.

I rearranged the sawhorses, and made a couple of wood cross bars to spread the load from the wings to the sawhorses. Newly confident that the sawhorse configuration would now hold, the wing was loaded up again to 1134 pounds. Would our little wing, our very high technology carbon fiber, be up to the task for our part 103 ultralight?

I knew it would be.

Here's a photo of the resulting 4G load.



Facts:

1. The wing panel weighs less than 14 pounds.
2. The weight under test is about 1134 pounds.
3. Deflection at the tip was 2.5 inches. (Would not include deflection due to lift strut stretching under tension, if any).
4. The first 5 rib positions have 200 pounds each. The sixth has 100 pounds. The seventh position, or wingtip has 20 pounds. The weight of the wing is just under 14 pounds. There is a clamp on the rear of the wing which weighs a pound or two. Total weight: 1134 pounds.

Opinion:

1. With covering, this wing design will hit an ultimate load of 5+Gs. How much, exactly, I don't know. But based on the deflection, and the characteristics of carbon fiber, someone smarter than I should be able to offer a guess.

Our stated strength is +3.8/-1.5Gs. We do not approve aerobatic maneuvers. :-)

Sunday evening: I've decided to add a bonus photo of the original test which failed the ribs.


In this earlier positive G loading test, the weight is 14*32.4 pounds + 6*50 pounds per wing for a total of about 1530 pounds across both wings, and as can be seen, the test was done with the fuselage inverted. As a result, all loads are resolved as if the wings were really being stressed in flight. We continued to load a few more bricks on the wing before we stopped the test, due to rib failures.

Wednesday, August 5, 2009

Price of Belite 254 too high?

I received an email from a friend, it had the following quote embedded within it:

"I was shocked and saddened by one plane that did a re-appearance. The Kitfox Lite is availabable again as a kit or flyaway. If you want a Part 103 fly away from them with the new carbon fiber wing it is $63,000!!!!!! What has happened to the logic in the market? Part 103 is supposed to be an entry level."

I'm sorry to hear of the negative response to the pricepoint, so I wanted to try and explain our point of view. (Also, we are not the Kitfox Lite, we are the Belite! :-)

First of all, we were offering bolt together airplane kits for $25K, including brand new engine, at the show. This price point resonated with many people. For another $1K, we would upgrade the engine from the 28HP to the 45HP. The only major task left for the purchaser is covering with fabric, and a good fast person can get that done in one week. (We quoted 250 hours of time, FWIW.) For that price, the fuselage and all metal are completely welded, and the wing is fully assembled.

Carbon fiber is AMAZING, and also ridiculously strong and light. With those benefits, there is a high price point to be paid, so we do have a considerable upcharge to move to carbon fiber. Commercial sites such as www.dragonplate.com sell carbon fiber tubing, suitable for spars, for around $150 per foot. (Their lengths are too short to be usable, we developed our own patent pending process for making spars in appropriate lengths.) It takes 48 feet of carbon fiber spars to make two wings. We charge an additional $7K for the carbon fiber upgrade at this time, although we may have to raise that price.

The airplane in question was loaded beyond belief -- carbon fiber everywhere, big engine, powerfin prop, full panel with built in transceiver, and transponder, electrical system, fuel gauge, much more. About the only thing missing was an autopilot (and we're talking to TruTrak about that!) It will soon also have a BRS parachute. The price point for that particular plane is aimed at people who don't have time to build, and want the very finest part 103 airplane possible. That is our carbon fiber airplane. We make the best part feature laden part 103 airplane in the market, period.

What I discovered at the show is that part 103 serves many purposes:

1) It is a low cost category, for those who want to build at the lowest possible cost. We service this market by providing kits including our 'classic' kit which is wood and aluminum, not carbon fiber. At this time, carbon fiber is not a low cost product, as I explained earlier.

2) It is a fun level category, for those who simply want to fly without hassle of medical, registration, or license. All of our aircraft variations fit this market.

3) It is the only alternative for those who have been denied a medical, yet still want to fly a real airplane. This class of customer is not looking for a part 103 aircraft which doesn't look or feel like a 'real' airplane. They want our airplane, which flies like an old fashioned taildragger. They love it! Many of these potential customers are interested in getting all of the aircraft add-ons that they can get, for instance, the full panel with transponder, the parachute, the better propeller, better landing gear, hydraulic brakes -- all things that add hundreds to thousands of dollars at a time.

4) It is a great area for technology exploration, which I am doing. Part 103 allows just about everything, within a very simple set of rules. We have accomplished in 6 months what takes years at other aircraft companies.

I have seen many companies make pricing errors on their products -- I believe that the aircraft industry suffers disproportionately from a stronger desire to fly than to ensure that jobs are created and companies are preserved. I tend to err towards the latter, for which I make no apology.

Even so, our $25K bolt together kit seems like a pretty good deal. If we substantially reduced the welding, we could substantially reduce the price. Perhaps I should do that, and I will consider it.

Yes, we did get feedback from others on lower cost kits. If I was in the market, I would carefully evaluate the additional work remaining on all of these before making a decision. I saw great products from many companies!

One of the other interesting pieces of feedback that I received was on people who had bought partial kits, such as tail feathers or a wing kit, from other companies. When they went back to get their next kit, the company was out of business. Hmmm. That would sure destroy the feeling of a bargain!

In 2008, I remember hearing about a lot of the same types of conversation of pricepoints in the LSA (light sport) market. Even as people complained about price, one dealer reported that 90% of the customer base was buying airplanes with most options.

I am very interested in your feedback! Please feel free to offer comments or email me at james@beliteaircraft.com