Showing posts with label experimental. Show all posts
Showing posts with label experimental. Show all posts

Thursday, October 28, 2021

The Curious In-Flight Engine Failure of N3748 in Alabama

I was flying N3748, the very first Chipper 2, and I was in cruise, home-bound from a successful Sun-N-Fun in a stiff headwind. One moment, a very choppy but normal aircraft experience. The exact next moment, the propeller was dead-still, and had come to that dead-still position in just one or two revolutions of the crankshaft. It was the kind of violent engine stoppage that screams that all is not well, and that your 'full and undivided' attention needs to be on resolving the emergency of the moment. I looked down, as I scanned the area for a place for an immediate dead stick emergency landing.

I took some critique recently for editing and posting a YouTube video which was described as click-bait. This article is not that; I will tell you exactly what happened, how I responded, and what we found in the engine. I have witnesses who were there, and I have photos of the aftermath of the engine. I won't belabor this story; I've kept this as a short and easy read.

Sun-N-Fun, 2018

But the first order of business for this curious tale is to backup just a few days, to Sun-N-Fun, 2018. I was there with Chipper 2, and it was a success story. Chipper 2 N3748 performed without flaw, showing outstanding takeoff and landing capabilities.


Chipper 2 at Sun-N-Fun

To my delight, it even got the cover of General Aviation News. Describing the airplane as "Chipper in Paradise", it helped fuel good PR, sales, and momentum for Chipper Aerospace, my company.

Chipper in Paradise

Engine Changes

Chipper had started out as a two place aircraft project. I originally saw it as an airframe powered by a 60HP engine. To that end, I'd purchased a used Japanese HKS 700e engine, installed it on the plane, and discovered that the engine needed an overhaul. So Chipper never flew with 60HP.

After much consideration, I purchased a new Rotax 912UL, an 80HP engine, brand and spanking new. Everyone who flew it loved it. It did not disappoint at 80HP, and was bucking the trend that light sport aircraft needed to have 100HP engines. Hogwash; I showed them otherwise and proved it.

Yet there was that lust for power, for an improvement in ground roll, for an increased angle of climb. Without changing to yet another engine, the only way I could squeeze more performance out of my Rotax was to upgrade it using an aftermarket kit. When the engine had about 150 hours of use on it, I decided to purchase an engine upgrade from Edge Performance. 

The kit was ordered and received. It was principally installed by a local A&P mechanic. I never touched anything; I'm not an engine guy.

The upgraded engine on N3748 was what I took and showed in Florida.

And its performance was fairly phenomenal. Here's video proof, which I took in-cockpit while taking off in front of a crowd at Sun-N-Fun:

The Flight Home

This is what I remember about the flight home. First of all, the wind, blowing on the nose of the airplane, making every effort to slow my progress.  I tried low altitudes. That increased airspeed, at the expense of bitter, angry jostling of the airframe. I tried high altitudes. A smoother ride, at the expense of speed. For a long while, I was just a few hundred feet off the Alabama forests, with no landing options but with faster speeds. For whatever reason, before I reached Evergreen, Alabama, I climbed up several thousand feet.

When it Gets Real

While in cruise at approximately 4000' altitude, I experienced a sudden and complete loss of power of N3748. One moment all was well, and the next moment, the propeller was fully stopped. My body told me that a restart was not possible due to the shaking experienced while it shut down. Perhaps I touched the starter; perhaps I checked fuel.  I am not certain and I knew it didn't matter. The engine had failed.

I had been traveling over endless miles of forest, with low or non-existent options for emergency landings. I knew I had been playing my odds wrong (I'm always looking for emergency locations.)

This time, I looked straight down, and I realized that I was over the midpoint of the east-west runway of KGZH, Evergreen Regional Airport (AKA Middleton Field). Having already established glide, I made a left turn to reverse course and establish a dead-stick pattern downwind. I looked up the frequency for the airport, and quickly dialed into my radio.

I said: "Evergreen, are you there?"

An angel said back: "This is Evergreen Regional, I read you."

I said: "Evergreen, I am dead-stick overhead your airport now, landing. Can you observe my landing?" I don't remember using the emergency word, but I know that my language conveyed emergency, urgency, and fear, all in one.

The angel said: "Wilco, I'll hop in the truck and see you on the ground."

I think I got all that done while on downwind. A little voice in my hide was nagging me on the irony of dead-sticking into a huge paved airport, and then ending up short on final. That would be an insult wrapped in a tragedy inside of an emergency. I didn't want that to happen.

Adjusting glide, I added flaps and also added a little droop aileron. I listened to the electric linear motors driving the flaps and droop mechanism. I listened to the air flowing around the aircraft.

I turned base.

I turned final.

I passed over the threshold, probably 100+ feet off the ground.

I touched down. It was a pretty good landing. I was one-third down the runway, with a thousand feet behind me and two or three thousand ahead of me.

I rolled to a stop, and off to my right the Angel drove up in a pickup truck.

Tears / crying, but I was alive and unhurt.

Engine Teardown

Let's cut straight to the cause: the engine failure was caused by a failure of and/or improper installation of a clip. The engine had clearly been operating for some time with the failed condition.

Failed Piston in upgraded Rotax

Failed Rotax Cylinder with upgrade

Spark plugs in failed upgraded Rotax

Failed Crankcase and Connecting Rod



Aftermath

After the teardown, the plane was loaded into a rental truck, and I drove it home. It eventually was repaired and received a couple more upgrades, before I flew it to Alaska, and it was destroyed after another engine failure. (Another story for another time.)

Curious Questions

1) Why did the engine fail when I was mid-field over an airport?

2) Why did I upgrade the engine in the first place?

3) What could have been done to prevent this from happening?

The Angel

The airport manager was a wonderful woman, whose name was Terri. She was emotionally and resource-wise helpful to me and spared no effort to make my stay in Evergreen comfortable. I got the use of the airport car, of course. :-)








Sunday, August 30, 2009

Sport Pilot Cover Story on Belite Aircraft; New Pricing

I am, in my heart, an entrepreneur. I like to take risks, innovate, market my ideas and see what happens.

At Airventure, I was privileged to introduce a new aircraft: the Belite 254 CF, which is a FAR part 103 legal airplane. This aircraft features a lot of carbon fiber, in a very delightful, small package.

This airplane caught the attention of a lot of people.

We had chosen to display it in the North exhibit area, far away from the rest of the ultralights. We chose to do this because we felt we had a fundamentally different idea about how an ultralight should be designed and marketed. We thought our potential customers might not be ‘ultralight’ enthusiasts. We were looking for people who appreciated innovative engineering, sprightly design, good looks, and a measure of taildragger conventionality, all while flying and owning an airplane that does not require an FAA registration, nor a pilot’s license, nor a medical. (Bad or declined medicals are welcome as well, thanks to the graces of Federal Aviation Regulations FAR part 103.)

Our friends at the Experimental Aircraft Association have chosen to publish an article about the Belite as their cover story this month (September cover) in Sport Pilot magazine. We are truly honored.

We have decided to streamline our product offering a bit. We created a new low cost version of our airplane, which we call the Belite 254. It looks exactly like its big brother, the Belite 254 CF, with the exception that the rear fuselage is not fabric covered. Have a look:

We were able to cut the price by using more aluminum and less carbon fiber, and by cutting out all of the options which add expense but provide no benefits to the patch flyer. As a result, it is available ready to fly for $25,000 less than the Carbon Fiber version!

Here's another pic (the windshield hasn't been installed yet, but will be later this week.)

We will be introducing a cost reduced *kit* as well, which will be available for substantially less. This is possible because we are paying careful attention to the options which people want, and we are also able to cut out some labor expense by tack welding the steel. Many of our potential customers want to do their own welding; we're happy to oblige. This revised kit pricing will be announced in September, and it will be big, welcome news for budget minded homebuilders! Stay tuned. (Send an email to us: info AT beliteaircraft.com, if you are interested in our kit pricing when it’s released.)

Here’s our new price list:

1) Belite 254, Ready To Fly, for $29,995. This plane incorporates a lot of goodies: Carbon fiber firewall; 28HP engine; full span flaperons; aircraft grade steel fuselage and cabin; 5 gallon detachable fuel tank; (for easy refueling); 5 inch wheels; brakes; electric start, full lexan windshield, fiberglass cowling, flight instrumentation, much more! Also includes a sharp looking paint job! We believe that this is the finest value in very light aircraft in the world. It looks like an airplane, it flies like an airplane, it’s economical, and the wings fold for easy storage and transport. It crushes FAR Part 103 weight requirements with a flying weight of about 235 pounds!!

2) Belite 254 CF; Ready To Fly, for $54,995. This version adds approximately 50 features, including carbon fiber spars and ribs; hydraulic brakes; wood instrument panel with lots of good stuff in it; ballistic parachute; the list goes on and on. You name it, the Belite 254 CF has got it as a feature.

3) Belite 254 KIT, price to be announced in September! Stay tuned.

Now the fine print bad news: Our delivery position availability is limited. A deposit of $2,500 holds a delivery position. First come, first serve. We reserve the right to raise prices at any time. Etc., Etc.

Specific details of each configuration are in the website, www.beliteaircraft.com

If you want to see it fly, look at http://www.youtube.com/user/BeliteAircraft#play/uploads/0/byy6qR8TB5w to see our demo video.

If you are looking for the very finest Part 103 legal aircraft, you have arrived. Enjoy!

Fly Safe and Have Fun,

James Wiebe, CEO

Belite Aircraft

P.S. We are looking for qualified dealers and international distributors for our aircraft. If interested, please understand that we require dealers to order a demo unit (to show) and one more aircraft. We have a similar program for international distributors. In return, we offer a generous discount and a territory.